Body Hammers are drop forged from high carbon steel, heat treated, quenched and have tempered heads. They have a burnt lacquer finish, Grade B (or better), and Hickory wooden handles or cushion grip fiberglass handles. The hammer was one of the basic hand tools around which the body and fender repair trade was developed. The pick hammer has a long-reach, thin point for low spot on low-crown panels, and it reaches over inner obstructions. Face, 1 ¼” round point, 1/32” radius. Length of pointed end, 5 ½”.
Made in the USA
| Part Number | Type | Description |
|---|---|---|
| 150FG | DINGING HAMMER | "For fender and high-crowned panel dinging or bumping. Both high and low-crown faces for ""on or off dolly"" work. Faces, 1-1/4"" and 1-9/16"". Round heads, 6"" overall. Weight 1.04 lb" |
| 151FG | DINGING HAMMER | "For light dinging and long reach. Square face permits dinging close to moulding or beading. Faces, 1-1/4"" round, 1-1/16"" square head 6"" overall. Weight .85 lb" |
| 153FG | CROSS CHISEL HAMMER | "Excellent for finishing. Cross peen used for working in sharp corners around mouldings and for caulking. Round face — 1-9/16"" diameter. Chisel — 3"" long. Weight .87 lb" |
| 153FGB | CURVED CROSS CHISEL HAMMER | "Excellent for finishing. Cross peen used for working in sharp corners around mouldings and for caulking. Well balanced curved chisel for work in close places. Round face — 1-9/16"" diameter. Chisel — 3"" long. Weight .85 lb" |
| 153SFG | CROSS CHISEL SHRINKING HAMMER | "Cross grooved. Extra wide faces are cross grooved and used for shrinkage on large surfaces — chisel end used on sharp corners. Flat round face — 1-9/16"" diameter. Chisel — 3"" long. Weight .87 lb" |
| 154FG | VERTICAL CHISEL HAMMER | "Excellent for finishing. Cross peen used for working in sharp corners around mouldings and for caulking. Vertical chisel end used on sharp corners. Round face — 1-1/2"" diameter. 5/8"" Chisel — 5-1/2"" long. Weight .85 lb" |
| 154SFG | VERTICAL CHISEL SHRINKING HAMMER | "Cross grooved. Extra wide faces are cross grooved and used for shrinkage on large surfaces — vertical chisel end used on sharp corners. Round face — 1-1/2"" diameter. Chisel — 5-1/2"" long. Weight .87 lb" |
| 155FG | FENDER BUMPER | For bumping where hand and dolly cannot reach. Ample clearance for obstructions. Also used as a caulking iron. Length of head, 8-3/4". Weight 2.8 lb |
| 156FG | PICK HAMMER | Long-reach, thin point for low spot on low-crown panels. Reaches over inner obstructions. One high-crown face. Face, 1-1/4" round point, 1/32" radius. Length of pointed end, 5-1/2". Weight .91 lb |
| 156FGB | CURVED PICK HAMMER | "Like 156G except pick end is bent in arc of normal blow. Reaches behind reinforcements to difficult spots. Face, 11/4"" round point, 1/32"" radius. Length of pointed end, 5-1/2"". Weight .86 lb" |
| 158FG | GENERAL PURPOSE PICK HAMMER | "Medium size point and reach for general work. Low crown strawberry point for perfect balance. Face, 1-9/16"" round point, 3/32"" radius. Length of pick end, 3-3/4"". Weight .91 lb" |