https://www.abolox.com Wed, 7 Oct 2026 00:00:00 EST en-us https://www.abolox.com/Williams-EB-10T-Plain-Eye-Bolt-1quot-Thread-OD-1-34quot-Eye-ID-6-18quot-Length_p_74502.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $23.80 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-10T-Plain-Eye-Bolt-1quot-Thread-OD-1-34quot-Eye-ID-6-18quot-Length_p_74502.html EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $23.80 [Add to Cart]

]]> EYEBOLTS

Plain Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.
• Each lot is tested and inspected to insure conformance to specifications
• Available with UNC Class 2A thread only
• Plain pattern eyebolts must never be used to lift an angular load
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable
• Tightness and seating must be checked after initial load

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacturer.

EYEBOLTS

Plain Pattern

Product	Shank Diameter	Threads	Capacity of	Length of	Inner Diameter	Head Cross Section	Overall	Ultimate Strength
Code	(Inches)	per Inch	Vertical Load (lbs)	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(lbs)
EB-1T	1/4	20	500	1	3/4	9/32	2-1/4	2500
EB-2T	5/16	18	900	1-1/8	27/32	9/32	2-5/8	4500
EB-3T	3/8	16	1,300	1-1/4	1-1/32	5/16	2-29/32	6500
EB-4T	7/16	14	1,800	1-3/8	1-1/16	3/8	3-1/4	9000
EB-5T	1/2	13	1,400	1-1/2	1-1/8	5/32	3-5/8	12000
EB-6T	9/16	12	3,000	1-5/8	1-1/4	1/2	3-31/32	15000
EB-7T	5/8	11	4,000	1-3/4	1-5/16	9/16	4-3/8	20000
EB-8T	3/4	10	5,000	2	1-17/32	5/8	4-25/32	25000
EB-9T	7/8	9	7,000	2-1/4	1-5/8	13/16	5-9/16	35000
EB-10T	1	8	9,000	2-1/2	1-3/4	29/32	6-1/8	45000
EB-11T	1-1/8	7	12,000	2-3/4	1-15/16	1-1/16	6-7/8	60000
EB-12T	1-1/4	7	15,000	3-1/2	2-5/32	1-5/32	7-1/2	75000
EB-14T	1-1/2	6	21,000	3-3/4	2-7/16	1-13/32	8-13/16	105000
EB-15T	1-3/4	5	28,000	3-3/4	2-25/32	1-21/32	9-7/8	140000
EB-16T	2	4-1/2	38,000	4	3-5/32	1-27/32	11	190000
EB-17T	2-1/2	4	56,000	5	4	2-1/4	13-1/2	280000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-11T-Plain-Eye-Bolt-1-18quot-Thread-OD-1-1516quot-Eye-ID-6-78quot-Length_p_74503.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $33.16 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-11T-Plain-Eye-Bolt-1-18quot-Thread-OD-1-1516quot-Eye-ID-6-78quot-Length_p_74503.html EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $33.16 [Add to Cart]

]]> EYEBOLTS

Plain Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.
• Each lot is tested and inspected to insure conformance to specifications
• Available with UNC Class 2A thread only
• Plain pattern eyebolts must never be used to lift an angular load
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable
• Tightness and seating must be checked after initial load

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacturer.

EYEBOLTS

Plain Pattern

Product	Shank Diameter	Threads	Capacity of	Length of	Inner Diameter	Head Cross Section	Overall	Ultimate Strength
Code	(Inches)	per Inch	Vertical Load (lbs)	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(lbs)
EB-1T	1/4	20	500	1	3/4	9/32	2-1/4	2500
EB-2T	5/16	18	900	1-1/8	27/32	9/32	2-5/8	4500
EB-3T	3/8	16	1,300	1-1/4	1-1/32	5/16	2-29/32	6500
EB-4T	7/16	14	1,800	1-3/8	1-1/16	3/8	3-1/4	9000
EB-5T	1/2	13	1,400	1-1/2	1-1/8	5/32	3-5/8	12000
EB-6T	9/16	12	3,000	1-5/8	1-1/4	1/2	3-31/32	15000
EB-7T	5/8	11	4,000	1-3/4	1-5/16	9/16	4-3/8	20000
EB-8T	3/4	10	5,000	2	1-17/32	5/8	4-25/32	25000
EB-9T	7/8	9	7,000	2-1/4	1-5/8	13/16	5-9/16	35000
EB-10T	1	8	9,000	2-1/2	1-3/4	29/32	6-1/8	45000
EB-11T	1-1/8	7	12,000	2-3/4	1-15/16	1-1/16	6-7/8	60000
EB-12T	1-1/4	7	15,000	3-1/2	2-5/32	1-5/32	7-1/2	75000
EB-14T	1-1/2	6	21,000	3-3/4	2-7/16	1-13/32	8-13/16	105000
EB-15T	1-3/4	5	28,000	3-3/4	2-25/32	1-21/32	9-7/8	140000
EB-16T	2	4-1/2	38,000	4	3-5/32	1-27/32	11	190000
EB-17T	2-1/2	4	56,000	5	4	2-1/4	13-1/2	280000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-12T-Plain-Eye-Bolt-1-14quot-Thread-OD-2-532quot-Eye-ID-7-12quot-Length_p_74504.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $46.89 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-12T-Plain-Eye-Bolt-1-14quot-Thread-OD-2-532quot-Eye-ID-7-12quot-Length_p_74504.html EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $46.89 [Add to Cart]

]]> EYEBOLTS

Plain Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.
• Each lot is tested and inspected to insure conformance to specifications
• Available with UNC Class 2A thread only
• Plain pattern eyebolts must never be used to lift an angular load
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable
• Tightness and seating must be checked after initial load

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacturer.

EYEBOLTS

Plain Pattern

Product	Shank Diameter	Threads	Capacity of	Length of	Inner Diameter	Head Cross Section	Overall	Ultimate Strength
Code	(Inches)	per Inch	Vertical Load (lbs)	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(lbs)
EB-1T	1/4	20	500	1	3/4	9/32	2-1/4	2500
EB-2T	5/16	18	900	1-1/8	27/32	9/32	2-5/8	4500
EB-3T	3/8	16	1,300	1-1/4	1-1/32	5/16	2-29/32	6500
EB-4T	7/16	14	1,800	1-3/8	1-1/16	3/8	3-1/4	9000
EB-5T	1/2	13	1,400	1-1/2	1-1/8	5/32	3-5/8	12000
EB-6T	9/16	12	3,000	1-5/8	1-1/4	1/2	3-31/32	15000
EB-7T	5/8	11	4,000	1-3/4	1-5/16	9/16	4-3/8	20000
EB-8T	3/4	10	5,000	2	1-17/32	5/8	4-25/32	25000
EB-9T	7/8	9	7,000	2-1/4	1-5/8	13/16	5-9/16	35000
EB-10T	1	8	9,000	2-1/2	1-3/4	29/32	6-1/8	45000
EB-11T	1-1/8	7	12,000	2-3/4	1-15/16	1-1/16	6-7/8	60000
EB-12T	1-1/4	7	15,000	3-1/2	2-5/32	1-5/32	7-1/2	75000
EB-14T	1-1/2	6	21,000	3-3/4	2-7/16	1-13/32	8-13/16	105000
EB-15T	1-3/4	5	28,000	3-3/4	2-25/32	1-21/32	9-7/8	140000
EB-16T	2	4-1/2	38,000	4	3-5/32	1-27/32	11	190000
EB-17T	2-1/2	4	56,000	5	4	2-1/4	13-1/2	280000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-14T-Plain-Eye-Bolt-1-12quot-Thread-OD-2-716quot-Eye-ID-8-1316quot-Length_p_74505.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $79.58 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-14T-Plain-Eye-Bolt-1-12quot-Thread-OD-2-716quot-Eye-ID-8-1316quot-Length_p_74505.html EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $79.58 [Add to Cart]

]]> EYEBOLTS

Plain Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.
• Each lot is tested and inspected to insure conformance to specifications
• Available with UNC Class 2A thread only
• Plain pattern eyebolts must never be used to lift an angular load
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable
• Tightness and seating must be checked after initial load

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacturer.

EYEBOLTS

Plain Pattern

Product	Shank Diameter	Threads	Capacity of	Length of	Inner Diameter	Head Cross Section	Overall	Ultimate Strength
Code	(Inches)	per Inch	Vertical Load (lbs)	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(lbs)
EB-1T	1/4	20	500	1	3/4	9/32	2-1/4	2500
EB-2T	5/16	18	900	1-1/8	27/32	9/32	2-5/8	4500
EB-3T	3/8	16	1,300	1-1/4	1-1/32	5/16	2-29/32	6500
EB-4T	7/16	14	1,800	1-3/8	1-1/16	3/8	3-1/4	9000
EB-5T	1/2	13	1,400	1-1/2	1-1/8	5/32	3-5/8	12000
EB-6T	9/16	12	3,000	1-5/8	1-1/4	1/2	3-31/32	15000
EB-7T	5/8	11	4,000	1-3/4	1-5/16	9/16	4-3/8	20000
EB-8T	3/4	10	5,000	2	1-17/32	5/8	4-25/32	25000
EB-9T	7/8	9	7,000	2-1/4	1-5/8	13/16	5-9/16	35000
EB-10T	1	8	9,000	2-1/2	1-3/4	29/32	6-1/8	45000
EB-11T	1-1/8	7	12,000	2-3/4	1-15/16	1-1/16	6-7/8	60000
EB-12T	1-1/4	7	15,000	3-1/2	2-5/32	1-5/32	7-1/2	75000
EB-14T	1-1/2	6	21,000	3-3/4	2-7/16	1-13/32	8-13/16	105000
EB-15T	1-3/4	5	28,000	3-3/4	2-25/32	1-21/32	9-7/8	140000
EB-16T	2	4-1/2	38,000	4	3-5/32	1-27/32	11	190000
EB-17T	2-1/2	4	56,000	5	4	2-1/4	13-1/2	280000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-15T-Plain-Eye-Bolt-1-34quot-Thread-OD-2-34quot-Eye-ID-9-78quot-Length_p_74506.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $127.42 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-15T-Plain-Eye-Bolt-1-34quot-Thread-OD-2-34quot-Eye-ID-9-78quot-Length_p_74506.html EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $127.42 [Add to Cart]

]]> EYEBOLTS

Plain Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.
• Each lot is tested and inspected to insure conformance to specifications
• Available with UNC Class 2A thread only
• Plain pattern eyebolts must never be used to lift an angular load
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable
• Tightness and seating must be checked after initial load

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacturer.

EYEBOLTS

Plain Pattern

Product	Shank Diameter	Threads	Capacity of	Length of	Inner Diameter	Head Cross Section	Overall	Ultimate Strength
Code	(Inches)	per Inch	Vertical Load (lbs)	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(lbs)
EB-1T	1/4	20	500	1	3/4	9/32	2-1/4	2500
EB-2T	5/16	18	900	1-1/8	27/32	9/32	2-5/8	4500
EB-3T	3/8	16	1,300	1-1/4	1-1/32	5/16	2-29/32	6500
EB-4T	7/16	14	1,800	1-3/8	1-1/16	3/8	3-1/4	9000
EB-5T	1/2	13	1,400	1-1/2	1-1/8	5/32	3-5/8	12000
EB-6T	9/16	12	3,000	1-5/8	1-1/4	1/2	3-31/32	15000
EB-7T	5/8	11	4,000	1-3/4	1-5/16	9/16	4-3/8	20000
EB-8T	3/4	10	5,000	2	1-17/32	5/8	4-25/32	25000
EB-9T	7/8	9	7,000	2-1/4	1-5/8	13/16	5-9/16	35000
EB-10T	1	8	9,000	2-1/2	1-3/4	29/32	6-1/8	45000
EB-11T	1-1/8	7	12,000	2-3/4	1-15/16	1-1/16	6-7/8	60000
EB-12T	1-1/4	7	15,000	3-1/2	2-5/32	1-5/32	7-1/2	75000
EB-14T	1-1/2	6	21,000	3-3/4	2-7/16	1-13/32	8-13/16	105000
EB-15T	1-3/4	5	28,000	3-3/4	2-25/32	1-21/32	9-7/8	140000
EB-16T	2	4-1/2	38,000	4	3-5/32	1-27/32	11	190000
EB-17T	2-1/2	4	56,000	5	4	2-1/4	13-1/2	280000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-16T-Plain-Eye-Bolt-2quot-Thread-OD-3-532quot-Eye-ID-11quot-Length_p_74507.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $169.58 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-16T-Plain-Eye-Bolt-2quot-Thread-OD-3-532quot-Eye-ID-11quot-Length_p_74507.html EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $169.58 [Add to Cart]

]]> EYEBOLTS

Plain Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.
• Each lot is tested and inspected to insure conformance to specifications
• Available with UNC Class 2A thread only
• Plain pattern eyebolts must never be used to lift an angular load
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable
• Tightness and seating must be checked after initial load

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacturer.

EYEBOLTS

Plain Pattern

Product	Shank Diameter	Threads	Capacity of	Length of	Inner Diameter	Head Cross Section	Overall	Ultimate Strength
Code	(Inches)	per Inch	Vertical Load (lbs)	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(lbs)
EB-1T	1/4	20	500	1	3/4	9/32	2-1/4	2500
EB-2T	5/16	18	900	1-1/8	27/32	9/32	2-5/8	4500
EB-3T	3/8	16	1,300	1-1/4	1-1/32	5/16	2-29/32	6500
EB-4T	7/16	14	1,800	1-3/8	1-1/16	3/8	3-1/4	9000
EB-5T	1/2	13	1,400	1-1/2	1-1/8	5/32	3-5/8	12000
EB-6T	9/16	12	3,000	1-5/8	1-1/4	1/2	3-31/32	15000
EB-7T	5/8	11	4,000	1-3/4	1-5/16	9/16	4-3/8	20000
EB-8T	3/4	10	5,000	2	1-17/32	5/8	4-25/32	25000
EB-9T	7/8	9	7,000	2-1/4	1-5/8	13/16	5-9/16	35000
EB-10T	1	8	9,000	2-1/2	1-3/4	29/32	6-1/8	45000
EB-11T	1-1/8	7	12,000	2-3/4	1-15/16	1-1/16	6-7/8	60000
EB-12T	1-1/4	7	15,000	3-1/2	2-5/32	1-5/32	7-1/2	75000
EB-14T	1-1/2	6	21,000	3-3/4	2-7/16	1-13/32	8-13/16	105000
EB-15T	1-3/4	5	28,000	3-3/4	2-25/32	1-21/32	9-7/8	140000
EB-16T	2	4-1/2	38,000	4	3-5/32	1-27/32	11	190000
EB-17T	2-1/2	4	56,000	5	4	2-1/4	13-1/2	280000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-1T-Plain-Eye-Bolt-14quot-Thread-OD-34quot-Eye-ID-2-14quot-Length_p_74509.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $4.80 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-1T-Plain-Eye-Bolt-14quot-Thread-OD-34quot-Eye-ID-2-14quot-Length_p_74509.html EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $4.80 [Add to Cart]

]]> EYEBOLTS

Plain Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.
• Each lot is tested and inspected to insure conformance to specifications
• Available with UNC Class 2A thread only
• Plain pattern eyebolts must never be used to lift an angular load
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable
• Tightness and seating must be checked after initial load

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacturer.

EYEBOLTS

Plain Pattern

Product	Shank Diameter	Threads	Capacity of	Length of	Inner Diameter	Head Cross Section	Overall	Ultimate Strength
Code	(Inches)	per Inch	Vertical Load (lbs)	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(lbs)
EB-1T	1/4	20	500	1	3/4	9/32	2-1/4	2500
EB-2T	5/16	18	900	1-1/8	27/32	9/32	2-5/8	4500
EB-3T	3/8	16	1,300	1-1/4	1-1/32	5/16	2-29/32	6500
EB-4T	7/16	14	1,800	1-3/8	1-1/16	3/8	3-1/4	9000
EB-5T	1/2	13	1,400	1-1/2	1-1/8	5/32	3-5/8	12000
EB-6T	9/16	12	3,000	1-5/8	1-1/4	1/2	3-31/32	15000
EB-7T	5/8	11	4,000	1-3/4	1-5/16	9/16	4-3/8	20000
EB-8T	3/4	10	5,000	2	1-17/32	5/8	4-25/32	25000
EB-9T	7/8	9	7,000	2-1/4	1-5/8	13/16	5-9/16	35000
EB-10T	1	8	9,000	2-1/2	1-3/4	29/32	6-1/8	45000
EB-11T	1-1/8	7	12,000	2-3/4	1-15/16	1-1/16	6-7/8	60000
EB-12T	1-1/4	7	15,000	3-1/2	2-5/32	1-5/32	7-1/2	75000
EB-14T	1-1/2	6	21,000	3-3/4	2-7/16	1-13/32	8-13/16	105000
EB-15T	1-3/4	5	28,000	3-3/4	2-25/32	1-21/32	9-7/8	140000
EB-16T	2	4-1/2	38,000	4	3-5/32	1-27/32	11	190000
EB-17T	2-1/2	4	56,000	5	4	2-1/4	13-1/2	280000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-21T-Shoulder-Eye-Bolt-14quot-Thread-OD-34quot-Eye-ID-2-716quot-Length_p_74510.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $4.00 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-21T-Shoulder-Eye-Bolt-14quot-Thread-OD-34quot-Eye-ID-2-716quot-Length_p_74510.html EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $4.00 [Add to Cart]

]]> EYEBOLTS

Shoulder Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
• Each lot is tested and inspected to insure conformance to specifications.
• Available with UNC Class 2A thread only.
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced.
• Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially.
• A steel washer or spacer may be required for proper seating.
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable.
• Tightness and seating must be checked after initial load.

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacture.

EYEBOLTS

Shoulder Pattern

	Shank Diameter	Threads per	Length of	Inner Diameter	Head Cross-Section	Overall	Shoulder Width	Ultimate Strength
Product Code	(Inches)	Inch	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(Inches)	(lbs)
EB-21T	1/4	20	1	3/4	9/32	2-7/16	9/16	2500
EB-22T	5/16	18	1-1/8	27/32	9/32	2-7/8	19/32	4500
EB-23T	3/8	16	1-1/4	1	5/16	3-11/32	21/32	6500
EB-24T	7/16	14	1-3/8	1-1/16	3/8	3-23/32	27/32	9000
EB-25T	1/2	13	1-1/2	1-5/32	7/16	4-1/32	29/32	12000
EB-26T	9/16	12	1-5/8	1-11/32	7/32	4-13/32	15/16	15000
EB-27T	5/8	11	1-3/4	1-11/32	9/16	4-3/4	1-1/32	20000
EB-28T	3/4	10	2	1-1/2	11/16	5-11/32	1-5/16	25000
EB-29T	7/8	9	2-1/4	1-5/8	13/16	6	1-7/16	35000
EB-30T	1	8	2-1/2	1-13/16	7/8	6-3/4	1-5/8	45000
EB-31T	1-1/8	7	2-3/4	1-15/16	1-1/16	7-1/2	1-3/4	60000
EB-32T	1-1/4	7	3	2-1/8	1-3/16	8-3/8	2-1/32	75000
EB-34T	1-1/2	6	3-1/2	2-19/32	1-1/2	9-3/8	2-3/16	105000
EB-35T	1-3/4	5	3-3/4	2-27/32	1-19/32	10-3/4	2-1/2	140000
EB-36T	2	4-1/2	4	3-5/32	1-7/8	12	2-29/32	190000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-22T-Shoulder-Eye-Bolt-516quot-Thread-OD-2732quot-Eye-ID-2-78quot-Length_p_74511.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $5.39 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-22T-Shoulder-Eye-Bolt-516quot-Thread-OD-2732quot-Eye-ID-2-78quot-Length_p_74511.html EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $5.39 [Add to Cart]

]]> EYEBOLTS

Shoulder Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
• Each lot is tested and inspected to insure conformance to specifications.
• Available with UNC Class 2A thread only.
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced.
• Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially.
• A steel washer or spacer may be required for proper seating.
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable.
• Tightness and seating must be checked after initial load.

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacture.

EYEBOLTS

Shoulder Pattern

	Shank Diameter	Threads per	Length of	Inner Diameter	Head Cross-Section	Overall	Shoulder Width	Ultimate Strength
Product Code	(Inches)	Inch	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(Inches)	(lbs)
EB-21T	1/4	20	1	3/4	9/32	2-7/16	9/16	2500
EB-22T	5/16	18	1-1/8	27/32	9/32	2-7/8	19/32	4500
EB-23T	3/8	16	1-1/4	1	5/16	3-11/32	21/32	6500
EB-24T	7/16	14	1-3/8	1-1/16	3/8	3-23/32	27/32	9000
EB-25T	1/2	13	1-1/2	1-5/32	7/16	4-1/32	29/32	12000
EB-26T	9/16	12	1-5/8	1-11/32	7/32	4-13/32	15/16	15000
EB-27T	5/8	11	1-3/4	1-11/32	9/16	4-3/4	1-1/32	20000
EB-28T	3/4	10	2	1-1/2	11/16	5-11/32	1-5/16	25000
EB-29T	7/8	9	2-1/4	1-5/8	13/16	6	1-7/16	35000
EB-30T	1	8	2-1/2	1-13/16	7/8	6-3/4	1-5/8	45000
EB-31T	1-1/8	7	2-3/4	1-15/16	1-1/16	7-1/2	1-3/4	60000
EB-32T	1-1/4	7	3	2-1/8	1-3/16	8-3/8	2-1/32	75000
EB-34T	1-1/2	6	3-1/2	2-19/32	1-1/2	9-3/8	2-3/16	105000
EB-35T	1-3/4	5	3-3/4	2-27/32	1-19/32	10-3/4	2-1/2	140000
EB-36T	2	4-1/2	4	3-5/32	1-7/8	12	2-29/32	190000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-23T-Shoulder-Eye-Bolt-38quot-Thread-OD-1quot-Eye-ID-3-1132quot-Length_p_74512.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $5.39 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-23T-Shoulder-Eye-Bolt-38quot-Thread-OD-1quot-Eye-ID-3-1132quot-Length_p_74512.html EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $5.39 [Add to Cart]

]]> EYEBOLTS

Shoulder Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
• Each lot is tested and inspected to insure conformance to specifications.
• Available with UNC Class 2A thread only.
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced.
• Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially.
• A steel washer or spacer may be required for proper seating.
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable.
• Tightness and seating must be checked after initial load.

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacture.

EYEBOLTS

Shoulder Pattern

	Shank Diameter	Threads per	Length of	Inner Diameter	Head Cross-Section	Overall	Shoulder Width	Ultimate Strength
Product Code	(Inches)	Inch	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(Inches)	(lbs)
EB-21T	1/4	20	1	3/4	9/32	2-7/16	9/16	2500
EB-22T	5/16	18	1-1/8	27/32	9/32	2-7/8	19/32	4500
EB-23T	3/8	16	1-1/4	1	5/16	3-11/32	21/32	6500
EB-24T	7/16	14	1-3/8	1-1/16	3/8	3-23/32	27/32	9000
EB-25T	1/2	13	1-1/2	1-5/32	7/16	4-1/32	29/32	12000
EB-26T	9/16	12	1-5/8	1-11/32	7/32	4-13/32	15/16	15000
EB-27T	5/8	11	1-3/4	1-11/32	9/16	4-3/4	1-1/32	20000
EB-28T	3/4	10	2	1-1/2	11/16	5-11/32	1-5/16	25000
EB-29T	7/8	9	2-1/4	1-5/8	13/16	6	1-7/16	35000
EB-30T	1	8	2-1/2	1-13/16	7/8	6-3/4	1-5/8	45000
EB-31T	1-1/8	7	2-3/4	1-15/16	1-1/16	7-1/2	1-3/4	60000
EB-32T	1-1/4	7	3	2-1/8	1-3/16	8-3/8	2-1/32	75000
EB-34T	1-1/2	6	3-1/2	2-19/32	1-1/2	9-3/8	2-3/16	105000
EB-35T	1-3/4	5	3-3/4	2-27/32	1-19/32	10-3/4	2-1/2	140000
EB-36T	2	4-1/2	4	3-5/32	1-7/8	12	2-29/32	190000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-24T-Shoulder-Eye-Bolt-716quot-Thread-OD-1-116quot-Eye-ID-3-2332quot-Length_p_74513.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $5.87 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-24T-Shoulder-Eye-Bolt-716quot-Thread-OD-1-116quot-Eye-ID-3-2332quot-Length_p_74513.html EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $5.87 [Add to Cart]

]]> EYEBOLTS

Shoulder Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
• Each lot is tested and inspected to insure conformance to specifications.
• Available with UNC Class 2A thread only.
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced.
• Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially.
• A steel washer or spacer may be required for proper seating.
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable.
• Tightness and seating must be checked after initial load.

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacture.

EYEBOLTS

Shoulder Pattern

	Shank Diameter	Threads per	Length of	Inner Diameter	Head Cross-Section	Overall	Shoulder Width	Ultimate Strength
Product Code	(Inches)	Inch	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(Inches)	(lbs)
EB-21T	1/4	20	1	3/4	9/32	2-7/16	9/16	2500
EB-22T	5/16	18	1-1/8	27/32	9/32	2-7/8	19/32	4500
EB-23T	3/8	16	1-1/4	1	5/16	3-11/32	21/32	6500
EB-24T	7/16	14	1-3/8	1-1/16	3/8	3-23/32	27/32	9000
EB-25T	1/2	13	1-1/2	1-5/32	7/16	4-1/32	29/32	12000
EB-26T	9/16	12	1-5/8	1-11/32	7/32	4-13/32	15/16	15000
EB-27T	5/8	11	1-3/4	1-11/32	9/16	4-3/4	1-1/32	20000
EB-28T	3/4	10	2	1-1/2	11/16	5-11/32	1-5/16	25000
EB-29T	7/8	9	2-1/4	1-5/8	13/16	6	1-7/16	35000
EB-30T	1	8	2-1/2	1-13/16	7/8	6-3/4	1-5/8	45000
EB-31T	1-1/8	7	2-3/4	1-15/16	1-1/16	7-1/2	1-3/4	60000
EB-32T	1-1/4	7	3	2-1/8	1-3/16	8-3/8	2-1/32	75000
EB-34T	1-1/2	6	3-1/2	2-19/32	1-1/2	9-3/8	2-3/16	105000
EB-35T	1-3/4	5	3-3/4	2-27/32	1-19/32	10-3/4	2-1/2	140000
EB-36T	2	4-1/2	4	3-5/32	1-7/8	12	2-29/32	190000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-25T-Shoulder-Eye-Bolt-12quot-Thread-OD-1-532quot-Eye-ID-4-132quot-Length_p_74514.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $6.66 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-25T-Shoulder-Eye-Bolt-12quot-Thread-OD-1-532quot-Eye-ID-4-132quot-Length_p_74514.html EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $6.66 [Add to Cart]

]]> EYEBOLTS

Shoulder Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
• Each lot is tested and inspected to insure conformance to specifications.
• Available with UNC Class 2A thread only.
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced.
• Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially.
• A steel washer or spacer may be required for proper seating.
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable.
• Tightness and seating must be checked after initial load.

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacture.

EYEBOLTS

Shoulder Pattern

	Shank Diameter	Threads per	Length of	Inner Diameter	Head Cross-Section	Overall	Shoulder Width	Ultimate Strength
Product Code	(Inches)	Inch	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(Inches)	(lbs)
EB-21T	1/4	20	1	3/4	9/32	2-7/16	9/16	2500
EB-22T	5/16	18	1-1/8	27/32	9/32	2-7/8	19/32	4500
EB-23T	3/8	16	1-1/4	1	5/16	3-11/32	21/32	6500
EB-24T	7/16	14	1-3/8	1-1/16	3/8	3-23/32	27/32	9000
EB-25T	1/2	13	1-1/2	1-5/32	7/16	4-1/32	29/32	12000
EB-26T	9/16	12	1-5/8	1-11/32	7/32	4-13/32	15/16	15000
EB-27T	5/8	11	1-3/4	1-11/32	9/16	4-3/4	1-1/32	20000
EB-28T	3/4	10	2	1-1/2	11/16	5-11/32	1-5/16	25000
EB-29T	7/8	9	2-1/4	1-5/8	13/16	6	1-7/16	35000
EB-30T	1	8	2-1/2	1-13/16	7/8	6-3/4	1-5/8	45000
EB-31T	1-1/8	7	2-3/4	1-15/16	1-1/16	7-1/2	1-3/4	60000
EB-32T	1-1/4	7	3	2-1/8	1-3/16	8-3/8	2-1/32	75000
EB-34T	1-1/2	6	3-1/2	2-19/32	1-1/2	9-3/8	2-3/16	105000
EB-35T	1-3/4	5	3-3/4	2-27/32	1-19/32	10-3/4	2-1/2	140000
EB-36T	2	4-1/2	4	3-5/32	1-7/8	12	2-29/32	190000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-26T-Shoulder-Eye-Bolt-916quot-Thread-OD-1-1132quot-Eye-ID-4-1332quot-Length_p_74515.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $8.76 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-26T-Shoulder-Eye-Bolt-916quot-Thread-OD-1-1132quot-Eye-ID-4-1332quot-Length_p_74515.html EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $8.76 [Add to Cart]

]]> EYEBOLTS

Shoulder Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
• Each lot is tested and inspected to insure conformance to specifications.
• Available with UNC Class 2A thread only.
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced.
• Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially.
• A steel washer or spacer may be required for proper seating.
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable.
• Tightness and seating must be checked after initial load.

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacture.

EYEBOLTS

Shoulder Pattern

	Shank Diameter	Threads per	Length of	Inner Diameter	Head Cross-Section	Overall	Shoulder Width	Ultimate Strength
Product Code	(Inches)	Inch	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(Inches)	(lbs)
EB-21T	1/4	20	1	3/4	9/32	2-7/16	9/16	2500
EB-22T	5/16	18	1-1/8	27/32	9/32	2-7/8	19/32	4500
EB-23T	3/8	16	1-1/4	1	5/16	3-11/32	21/32	6500
EB-24T	7/16	14	1-3/8	1-1/16	3/8	3-23/32	27/32	9000
EB-25T	1/2	13	1-1/2	1-5/32	7/16	4-1/32	29/32	12000
EB-26T	9/16	12	1-5/8	1-11/32	7/32	4-13/32	15/16	15000
EB-27T	5/8	11	1-3/4	1-11/32	9/16	4-3/4	1-1/32	20000
EB-28T	3/4	10	2	1-1/2	11/16	5-11/32	1-5/16	25000
EB-29T	7/8	9	2-1/4	1-5/8	13/16	6	1-7/16	35000
EB-30T	1	8	2-1/2	1-13/16	7/8	6-3/4	1-5/8	45000
EB-31T	1-1/8	7	2-3/4	1-15/16	1-1/16	7-1/2	1-3/4	60000
EB-32T	1-1/4	7	3	2-1/8	1-3/16	8-3/8	2-1/32	75000
EB-34T	1-1/2	6	3-1/2	2-19/32	1-1/2	9-3/8	2-3/16	105000
EB-35T	1-3/4	5	3-3/4	2-27/32	1-19/32	10-3/4	2-1/2	140000
EB-36T	2	4-1/2	4	3-5/32	1-7/8	12	2-29/32	190000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-27T-Shoulder-Eye-Bolt-58quot-Thread-OD-1-1132quot-Eye-ID-4-34quot-Length_p_74516.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $10.45 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-27T-Shoulder-Eye-Bolt-58quot-Thread-OD-1-1132quot-Eye-ID-4-34quot-Length_p_74516.html EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $10.45 [Add to Cart]

]]> EYEBOLTS

Shoulder Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
• Each lot is tested and inspected to insure conformance to specifications.
• Available with UNC Class 2A thread only.
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced.
• Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially.
• A steel washer or spacer may be required for proper seating.
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable.
• Tightness and seating must be checked after initial load.

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacture.

EYEBOLTS

Shoulder Pattern

	Shank Diameter	Threads per	Length of	Inner Diameter	Head Cross-Section	Overall	Shoulder Width	Ultimate Strength
Product Code	(Inches)	Inch	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(Inches)	(lbs)
EB-21T	1/4	20	1	3/4	9/32	2-7/16	9/16	2500
EB-22T	5/16	18	1-1/8	27/32	9/32	2-7/8	19/32	4500
EB-23T	3/8	16	1-1/4	1	5/16	3-11/32	21/32	6500
EB-24T	7/16	14	1-3/8	1-1/16	3/8	3-23/32	27/32	9000
EB-25T	1/2	13	1-1/2	1-5/32	7/16	4-1/32	29/32	12000
EB-26T	9/16	12	1-5/8	1-11/32	7/32	4-13/32	15/16	15000
EB-27T	5/8	11	1-3/4	1-11/32	9/16	4-3/4	1-1/32	20000
EB-28T	3/4	10	2	1-1/2	11/16	5-11/32	1-5/16	25000
EB-29T	7/8	9	2-1/4	1-5/8	13/16	6	1-7/16	35000
EB-30T	1	8	2-1/2	1-13/16	7/8	6-3/4	1-5/8	45000
EB-31T	1-1/8	7	2-3/4	1-15/16	1-1/16	7-1/2	1-3/4	60000
EB-32T	1-1/4	7	3	2-1/8	1-3/16	8-3/8	2-1/32	75000
EB-34T	1-1/2	6	3-1/2	2-19/32	1-1/2	9-3/8	2-3/16	105000
EB-35T	1-3/4	5	3-3/4	2-27/32	1-19/32	10-3/4	2-1/2	140000
EB-36T	2	4-1/2	4	3-5/32	1-7/8	12	2-29/32	190000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-28T-Shoulder-Eye-Bolt-34quot-Thread-OD-1-12quot-Eye-ID-5-1132quot-Length_p_74517.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $13.50 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-28T-Shoulder-Eye-Bolt-34quot-Thread-OD-1-12quot-Eye-ID-5-1132quot-Length_p_74517.html EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $13.50 [Add to Cart]

]]> EYEBOLTS

Shoulder Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
• Each lot is tested and inspected to insure conformance to specifications.
• Available with UNC Class 2A thread only.
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced.
• Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially.
• A steel washer or spacer may be required for proper seating.
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable.
• Tightness and seating must be checked after initial load.

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacture.

EYEBOLTS

Shoulder Pattern

	Shank Diameter	Threads per	Length of	Inner Diameter	Head Cross-Section	Overall	Shoulder Width	Ultimate Strength
Product Code	(Inches)	Inch	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(Inches)	(lbs)
EB-21T	1/4	20	1	3/4	9/32	2-7/16	9/16	2500
EB-22T	5/16	18	1-1/8	27/32	9/32	2-7/8	19/32	4500
EB-23T	3/8	16	1-1/4	1	5/16	3-11/32	21/32	6500
EB-24T	7/16	14	1-3/8	1-1/16	3/8	3-23/32	27/32	9000
EB-25T	1/2	13	1-1/2	1-5/32	7/16	4-1/32	29/32	12000
EB-26T	9/16	12	1-5/8	1-11/32	7/32	4-13/32	15/16	15000
EB-27T	5/8	11	1-3/4	1-11/32	9/16	4-3/4	1-1/32	20000
EB-28T	3/4	10	2	1-1/2	11/16	5-11/32	1-5/16	25000
EB-29T	7/8	9	2-1/4	1-5/8	13/16	6	1-7/16	35000
EB-30T	1	8	2-1/2	1-13/16	7/8	6-3/4	1-5/8	45000
EB-31T	1-1/8	7	2-3/4	1-15/16	1-1/16	7-1/2	1-3/4	60000
EB-32T	1-1/4	7	3	2-1/8	1-3/16	8-3/8	2-1/32	75000
EB-34T	1-1/2	6	3-1/2	2-19/32	1-1/2	9-3/8	2-3/16	105000
EB-35T	1-3/4	5	3-3/4	2-27/32	1-19/32	10-3/4	2-1/2	140000
EB-36T	2	4-1/2	4	3-5/32	1-7/8	12	2-29/32	190000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-29T-Shoulder-Eye-Bolt-78quot-Thread-OD-1-58quot-Eye-ID-6quot-Length_p_74518.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $18.36 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-29T-Shoulder-Eye-Bolt-78quot-Thread-OD-1-58quot-Eye-ID-6quot-Length_p_74518.html EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $18.36 [Add to Cart]

]]> EYEBOLTS

Shoulder Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
• Each lot is tested and inspected to insure conformance to specifications.
• Available with UNC Class 2A thread only.
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced.
• Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially.
• A steel washer or spacer may be required for proper seating.
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable.
• Tightness and seating must be checked after initial load.

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacture.

EYEBOLTS

Shoulder Pattern

	Shank Diameter	Threads per	Length of	Inner Diameter	Head Cross-Section	Overall	Shoulder Width	Ultimate Strength
Product Code	(Inches)	Inch	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(Inches)	(lbs)
EB-21T	1/4	20	1	3/4	9/32	2-7/16	9/16	2500
EB-22T	5/16	18	1-1/8	27/32	9/32	2-7/8	19/32	4500
EB-23T	3/8	16	1-1/4	1	5/16	3-11/32	21/32	6500
EB-24T	7/16	14	1-3/8	1-1/16	3/8	3-23/32	27/32	9000
EB-25T	1/2	13	1-1/2	1-5/32	7/16	4-1/32	29/32	12000
EB-26T	9/16	12	1-5/8	1-11/32	7/32	4-13/32	15/16	15000
EB-27T	5/8	11	1-3/4	1-11/32	9/16	4-3/4	1-1/32	20000
EB-28T	3/4	10	2	1-1/2	11/16	5-11/32	1-5/16	25000
EB-29T	7/8	9	2-1/4	1-5/8	13/16	6	1-7/16	35000
EB-30T	1	8	2-1/2	1-13/16	7/8	6-3/4	1-5/8	45000
EB-31T	1-1/8	7	2-3/4	1-15/16	1-1/16	7-1/2	1-3/4	60000
EB-32T	1-1/4	7	3	2-1/8	1-3/16	8-3/8	2-1/32	75000
EB-34T	1-1/2	6	3-1/2	2-19/32	1-1/2	9-3/8	2-3/16	105000
EB-35T	1-3/4	5	3-3/4	2-27/32	1-19/32	10-3/4	2-1/2	140000
EB-36T	2	4-1/2	4	3-5/32	1-7/8	12	2-29/32	190000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-2T-Plain-Eye-Bolt-516quot-Thread-OD-2732quot-Eye-ID-2-58quot-Length_p_74519.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $5.24 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-2T-Plain-Eye-Bolt-516quot-Thread-OD-2732quot-Eye-ID-2-58quot-Length_p_74519.html EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $5.24 [Add to Cart]

]]> EYEBOLTS

Plain Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.
• Each lot is tested and inspected to insure conformance to specifications
• Available with UNC Class 2A thread only
• Plain pattern eyebolts must never be used to lift an angular load
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable
• Tightness and seating must be checked after initial load

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacturer.

EYEBOLTS

Plain Pattern

Product	Shank Diameter	Threads	Capacity of	Length of	Inner Diameter	Head Cross Section	Overall	Ultimate Strength
Code	(Inches)	per Inch	Vertical Load (lbs)	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(lbs)
EB-1T	1/4	20	500	1	3/4	9/32	2-1/4	2500
EB-2T	5/16	18	900	1-1/8	27/32	9/32	2-5/8	4500
EB-3T	3/8	16	1,300	1-1/4	1-1/32	5/16	2-29/32	6500
EB-4T	7/16	14	1,800	1-3/8	1-1/16	3/8	3-1/4	9000
EB-5T	1/2	13	1,400	1-1/2	1-1/8	5/32	3-5/8	12000
EB-6T	9/16	12	3,000	1-5/8	1-1/4	1/2	3-31/32	15000
EB-7T	5/8	11	4,000	1-3/4	1-5/16	9/16	4-3/8	20000
EB-8T	3/4	10	5,000	2	1-17/32	5/8	4-25/32	25000
EB-9T	7/8	9	7,000	2-1/4	1-5/8	13/16	5-9/16	35000
EB-10T	1	8	9,000	2-1/2	1-3/4	29/32	6-1/8	45000
EB-11T	1-1/8	7	12,000	2-3/4	1-15/16	1-1/16	6-7/8	60000
EB-12T	1-1/4	7	15,000	3-1/2	2-5/32	1-5/32	7-1/2	75000
EB-14T	1-1/2	6	21,000	3-3/4	2-7/16	1-13/32	8-13/16	105000
EB-15T	1-3/4	5	28,000	3-3/4	2-25/32	1-21/32	9-7/8	140000
EB-16T	2	4-1/2	38,000	4	3-5/32	1-27/32	11	190000
EB-17T	2-1/2	4	56,000	5	4	2-1/4	13-1/2	280000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-30T-Shoulder-Eye-Bolt-1quot-Thread-OD-1-1316quot-Eye-ID-6-34quot-Length_p_74520.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $25.22 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-30T-Shoulder-Eye-Bolt-1quot-Thread-OD-1-1316quot-Eye-ID-6-34quot-Length_p_74520.html EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $25.22 [Add to Cart]

]]> EYEBOLTS

Shoulder Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
• Each lot is tested and inspected to insure conformance to specifications.
• Available with UNC Class 2A thread only.
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced.
• Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially.
• A steel washer or spacer may be required for proper seating.
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable.
• Tightness and seating must be checked after initial load.

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacture.

EYEBOLTS

Shoulder Pattern

	Shank Diameter	Threads per	Length of	Inner Diameter	Head Cross-Section	Overall	Shoulder Width	Ultimate Strength
Product Code	(Inches)	Inch	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(Inches)	(lbs)
EB-21T	1/4	20	1	3/4	9/32	2-7/16	9/16	2500
EB-22T	5/16	18	1-1/8	27/32	9/32	2-7/8	19/32	4500
EB-23T	3/8	16	1-1/4	1	5/16	3-11/32	21/32	6500
EB-24T	7/16	14	1-3/8	1-1/16	3/8	3-23/32	27/32	9000
EB-25T	1/2	13	1-1/2	1-5/32	7/16	4-1/32	29/32	12000
EB-26T	9/16	12	1-5/8	1-11/32	7/32	4-13/32	15/16	15000
EB-27T	5/8	11	1-3/4	1-11/32	9/16	4-3/4	1-1/32	20000
EB-28T	3/4	10	2	1-1/2	11/16	5-11/32	1-5/16	25000
EB-29T	7/8	9	2-1/4	1-5/8	13/16	6	1-7/16	35000
EB-30T	1	8	2-1/2	1-13/16	7/8	6-3/4	1-5/8	45000
EB-31T	1-1/8	7	2-3/4	1-15/16	1-1/16	7-1/2	1-3/4	60000
EB-32T	1-1/4	7	3	2-1/8	1-3/16	8-3/8	2-1/32	75000
EB-34T	1-1/2	6	3-1/2	2-19/32	1-1/2	9-3/8	2-3/16	105000
EB-35T	1-3/4	5	3-3/4	2-27/32	1-19/32	10-3/4	2-1/2	140000
EB-36T	2	4-1/2	4	3-5/32	1-7/8	12	2-29/32	190000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-31T-Shoulder-Eye-Bolt-1-18quot-Thread-OD-1-1516quot-Eye-ID-7-12quot-Length_p_74521.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $35.41 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-31T-Shoulder-Eye-Bolt-1-18quot-Thread-OD-1-1516quot-Eye-ID-7-12quot-Length_p_74521.html EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $35.41 [Add to Cart]

]]> EYEBOLTS

Shoulder Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
• Each lot is tested and inspected to insure conformance to specifications.
• Available with UNC Class 2A thread only.
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced.
• Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially.
• A steel washer or spacer may be required for proper seating.
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable.
• Tightness and seating must be checked after initial load.

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacture.

EYEBOLTS

Shoulder Pattern

	Shank Diameter	Threads per	Length of	Inner Diameter	Head Cross-Section	Overall	Shoulder Width	Ultimate Strength
Product Code	(Inches)	Inch	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(Inches)	(lbs)
EB-21T	1/4	20	1	3/4	9/32	2-7/16	9/16	2500
EB-22T	5/16	18	1-1/8	27/32	9/32	2-7/8	19/32	4500
EB-23T	3/8	16	1-1/4	1	5/16	3-11/32	21/32	6500
EB-24T	7/16	14	1-3/8	1-1/16	3/8	3-23/32	27/32	9000
EB-25T	1/2	13	1-1/2	1-5/32	7/16	4-1/32	29/32	12000
EB-26T	9/16	12	1-5/8	1-11/32	7/32	4-13/32	15/16	15000
EB-27T	5/8	11	1-3/4	1-11/32	9/16	4-3/4	1-1/32	20000
EB-28T	3/4	10	2	1-1/2	11/16	5-11/32	1-5/16	25000
EB-29T	7/8	9	2-1/4	1-5/8	13/16	6	1-7/16	35000
EB-30T	1	8	2-1/2	1-13/16	7/8	6-3/4	1-5/8	45000
EB-31T	1-1/8	7	2-3/4	1-15/16	1-1/16	7-1/2	1-3/4	60000
EB-32T	1-1/4	7	3	2-1/8	1-3/16	8-3/8	2-1/32	75000
EB-34T	1-1/2	6	3-1/2	2-19/32	1-1/2	9-3/8	2-3/16	105000
EB-35T	1-3/4	5	3-3/4	2-27/32	1-19/32	10-3/4	2-1/2	140000
EB-36T	2	4-1/2	4	3-5/32	1-7/8	12	2-29/32	190000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-32T-Shoulder-Eye-Bolt-1-14quot-Thread-OD-2-18quot-Eye-ID-8-38quot-Length_p_74522.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $47.25 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-32T-Shoulder-Eye-Bolt-1-14quot-Thread-OD-2-18quot-Eye-ID-8-38quot-Length_p_74522.html EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $47.25 [Add to Cart]

]]> EYEBOLTS

Shoulder Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
• Each lot is tested and inspected to insure conformance to specifications.
• Available with UNC Class 2A thread only.
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced.
• Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially.
• A steel washer or spacer may be required for proper seating.
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable.
• Tightness and seating must be checked after initial load.

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacture.

EYEBOLTS

Shoulder Pattern

	Shank Diameter	Threads per	Length of	Inner Diameter	Head Cross-Section	Overall	Shoulder Width	Ultimate Strength
Product Code	(Inches)	Inch	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(Inches)	(lbs)
EB-21T	1/4	20	1	3/4	9/32	2-7/16	9/16	2500
EB-22T	5/16	18	1-1/8	27/32	9/32	2-7/8	19/32	4500
EB-23T	3/8	16	1-1/4	1	5/16	3-11/32	21/32	6500
EB-24T	7/16	14	1-3/8	1-1/16	3/8	3-23/32	27/32	9000
EB-25T	1/2	13	1-1/2	1-5/32	7/16	4-1/32	29/32	12000
EB-26T	9/16	12	1-5/8	1-11/32	7/32	4-13/32	15/16	15000
EB-27T	5/8	11	1-3/4	1-11/32	9/16	4-3/4	1-1/32	20000
EB-28T	3/4	10	2	1-1/2	11/16	5-11/32	1-5/16	25000
EB-29T	7/8	9	2-1/4	1-5/8	13/16	6	1-7/16	35000
EB-30T	1	8	2-1/2	1-13/16	7/8	6-3/4	1-5/8	45000
EB-31T	1-1/8	7	2-3/4	1-15/16	1-1/16	7-1/2	1-3/4	60000
EB-32T	1-1/4	7	3	2-1/8	1-3/16	8-3/8	2-1/32	75000
EB-34T	1-1/2	6	3-1/2	2-19/32	1-1/2	9-3/8	2-3/16	105000
EB-35T	1-3/4	5	3-3/4	2-27/32	1-19/32	10-3/4	2-1/2	140000
EB-36T	2	4-1/2	4	3-5/32	1-7/8	12	2-29/32	190000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-34T-Shoulder-Eye-Bolt-1-12quot-Thread-OD-2-1932quot-Eye-ID-9-38quot-Length_p_74523.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $79.58 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-34T-Shoulder-Eye-Bolt-1-12quot-Thread-OD-2-1932quot-Eye-ID-9-38quot-Length_p_74523.html EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $79.58 [Add to Cart]

]]> EYEBOLTS

Shoulder Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
• Each lot is tested and inspected to insure conformance to specifications.
• Available with UNC Class 2A thread only.
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced.
• Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially.
• A steel washer or spacer may be required for proper seating.
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable.
• Tightness and seating must be checked after initial load.

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacture.

EYEBOLTS

Shoulder Pattern

	Shank Diameter	Threads per	Length of	Inner Diameter	Head Cross-Section	Overall	Shoulder Width	Ultimate Strength
Product Code	(Inches)	Inch	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(Inches)	(lbs)
EB-21T	1/4	20	1	3/4	9/32	2-7/16	9/16	2500
EB-22T	5/16	18	1-1/8	27/32	9/32	2-7/8	19/32	4500
EB-23T	3/8	16	1-1/4	1	5/16	3-11/32	21/32	6500
EB-24T	7/16	14	1-3/8	1-1/16	3/8	3-23/32	27/32	9000
EB-25T	1/2	13	1-1/2	1-5/32	7/16	4-1/32	29/32	12000
EB-26T	9/16	12	1-5/8	1-11/32	7/32	4-13/32	15/16	15000
EB-27T	5/8	11	1-3/4	1-11/32	9/16	4-3/4	1-1/32	20000
EB-28T	3/4	10	2	1-1/2	11/16	5-11/32	1-5/16	25000
EB-29T	7/8	9	2-1/4	1-5/8	13/16	6	1-7/16	35000
EB-30T	1	8	2-1/2	1-13/16	7/8	6-3/4	1-5/8	45000
EB-31T	1-1/8	7	2-3/4	1-15/16	1-1/16	7-1/2	1-3/4	60000
EB-32T	1-1/4	7	3	2-1/8	1-3/16	8-3/8	2-1/32	75000
EB-34T	1-1/2	6	3-1/2	2-19/32	1-1/2	9-3/8	2-3/16	105000
EB-35T	1-3/4	5	3-3/4	2-27/32	1-19/32	10-3/4	2-1/2	140000
EB-36T	2	4-1/2	4	3-5/32	1-7/8	12	2-29/32	190000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-35T-Shoulder-Eye-Bolt-1-34quot-Thread-OD-2-2732quot-Eye-ID-10-34quot-Length_p_74524.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $128.84 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-35T-Shoulder-Eye-Bolt-1-34quot-Thread-OD-2-2732quot-Eye-ID-10-34quot-Length_p_74524.html EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $128.84 [Add to Cart]

]]> EYEBOLTS

Shoulder Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
• Each lot is tested and inspected to insure conformance to specifications.
• Available with UNC Class 2A thread only.
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced.
• Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially.
• A steel washer or spacer may be required for proper seating.
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable.
• Tightness and seating must be checked after initial load.

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacture.

EYEBOLTS

Shoulder Pattern

	Shank Diameter	Threads per	Length of	Inner Diameter	Head Cross-Section	Overall	Shoulder Width	Ultimate Strength
Product Code	(Inches)	Inch	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(Inches)	(lbs)
EB-21T	1/4	20	1	3/4	9/32	2-7/16	9/16	2500
EB-22T	5/16	18	1-1/8	27/32	9/32	2-7/8	19/32	4500
EB-23T	3/8	16	1-1/4	1	5/16	3-11/32	21/32	6500
EB-24T	7/16	14	1-3/8	1-1/16	3/8	3-23/32	27/32	9000
EB-25T	1/2	13	1-1/2	1-5/32	7/16	4-1/32	29/32	12000
EB-26T	9/16	12	1-5/8	1-11/32	7/32	4-13/32	15/16	15000
EB-27T	5/8	11	1-3/4	1-11/32	9/16	4-3/4	1-1/32	20000
EB-28T	3/4	10	2	1-1/2	11/16	5-11/32	1-5/16	25000
EB-29T	7/8	9	2-1/4	1-5/8	13/16	6	1-7/16	35000
EB-30T	1	8	2-1/2	1-13/16	7/8	6-3/4	1-5/8	45000
EB-31T	1-1/8	7	2-3/4	1-15/16	1-1/16	7-1/2	1-3/4	60000
EB-32T	1-1/4	7	3	2-1/8	1-3/16	8-3/8	2-1/32	75000
EB-34T	1-1/2	6	3-1/2	2-19/32	1-1/2	9-3/8	2-3/16	105000
EB-35T	1-3/4	5	3-3/4	2-27/32	1-19/32	10-3/4	2-1/2	140000
EB-36T	2	4-1/2	4	3-5/32	1-7/8	12	2-29/32	190000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-36T-Shoulder-Eye-Bolt-2quot-Thread-OD-3-532quot-Eye-ID-12quot-Length_p_74525.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $167.68 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-36T-Shoulder-Eye-Bolt-2quot-Thread-OD-3-532quot-Eye-ID-12quot-Length_p_74525.html EYEBOLTSShoulder PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakageEach lot is tested and inspected to insure conformance to specifications.Avai...[Read More]
Our Price: $167.68 [Add to Cart]

]]> EYEBOLTS

Shoulder Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
• Each lot is tested and inspected to insure conformance to specifications.
• Available with UNC Class 2A thread only.
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced.
• Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially.
• A steel washer or spacer may be required for proper seating.
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable.
• Tightness and seating must be checked after initial load.

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacture.

EYEBOLTS

Shoulder Pattern

	Shank Diameter	Threads per	Length of	Inner Diameter	Head Cross-Section	Overall	Shoulder Width	Ultimate Strength
Product Code	(Inches)	Inch	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(Inches)	(lbs)
EB-21T	1/4	20	1	3/4	9/32	2-7/16	9/16	2500
EB-22T	5/16	18	1-1/8	27/32	9/32	2-7/8	19/32	4500
EB-23T	3/8	16	1-1/4	1	5/16	3-11/32	21/32	6500
EB-24T	7/16	14	1-3/8	1-1/16	3/8	3-23/32	27/32	9000
EB-25T	1/2	13	1-1/2	1-5/32	7/16	4-1/32	29/32	12000
EB-26T	9/16	12	1-5/8	1-11/32	7/32	4-13/32	15/16	15000
EB-27T	5/8	11	1-3/4	1-11/32	9/16	4-3/4	1-1/32	20000
EB-28T	3/4	10	2	1-1/2	11/16	5-11/32	1-5/16	25000
EB-29T	7/8	9	2-1/4	1-5/8	13/16	6	1-7/16	35000
EB-30T	1	8	2-1/2	1-13/16	7/8	6-3/4	1-5/8	45000
EB-31T	1-1/8	7	2-3/4	1-15/16	1-1/16	7-1/2	1-3/4	60000
EB-32T	1-1/4	7	3	2-1/8	1-3/16	8-3/8	2-1/32	75000
EB-34T	1-1/2	6	3-1/2	2-19/32	1-1/2	9-3/8	2-3/16	105000
EB-35T	1-3/4	5	3-3/4	2-27/32	1-19/32	10-3/4	2-1/2	140000
EB-36T	2	4-1/2	4	3-5/32	1-7/8	12	2-29/32	190000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-3T-Plain-Eye-Bolt-38quot-Thread-OD-1-132quot-Eye-ID-2-2932quot-Length_p_74526.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $5.59 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-3T-Plain-Eye-Bolt-38quot-Thread-OD-1-132quot-Eye-ID-2-2932quot-Length_p_74526.html EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $5.59 [Add to Cart]

]]> EYEBOLTS

Plain Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.
• Each lot is tested and inspected to insure conformance to specifications
• Available with UNC Class 2A thread only
• Plain pattern eyebolts must never be used to lift an angular load
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable
• Tightness and seating must be checked after initial load

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacturer.

EYEBOLTS

Plain Pattern

Product	Shank Diameter	Threads	Capacity of	Length of	Inner Diameter	Head Cross Section	Overall	Ultimate Strength
Code	(Inches)	per Inch	Vertical Load (lbs)	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(lbs)
EB-1T	1/4	20	500	1	3/4	9/32	2-1/4	2500
EB-2T	5/16	18	900	1-1/8	27/32	9/32	2-5/8	4500
EB-3T	3/8	16	1,300	1-1/4	1-1/32	5/16	2-29/32	6500
EB-4T	7/16	14	1,800	1-3/8	1-1/16	3/8	3-1/4	9000
EB-5T	1/2	13	1,400	1-1/2	1-1/8	5/32	3-5/8	12000
EB-6T	9/16	12	3,000	1-5/8	1-1/4	1/2	3-31/32	15000
EB-7T	5/8	11	4,000	1-3/4	1-5/16	9/16	4-3/8	20000
EB-8T	3/4	10	5,000	2	1-17/32	5/8	4-25/32	25000
EB-9T	7/8	9	7,000	2-1/4	1-5/8	13/16	5-9/16	35000
EB-10T	1	8	9,000	2-1/2	1-3/4	29/32	6-1/8	45000
EB-11T	1-1/8	7	12,000	2-3/4	1-15/16	1-1/16	6-7/8	60000
EB-12T	1-1/4	7	15,000	3-1/2	2-5/32	1-5/32	7-1/2	75000
EB-14T	1-1/2	6	21,000	3-3/4	2-7/16	1-13/32	8-13/16	105000
EB-15T	1-3/4	5	28,000	3-3/4	2-25/32	1-21/32	9-7/8	140000
EB-16T	2	4-1/2	38,000	4	3-5/32	1-27/32	11	190000
EB-17T	2-1/2	4	56,000	5	4	2-1/4	13-1/2	280000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-4T-Plain-Eye-Bolt-716quot-Thread-OD-1-16quot-Eye-ID-3-14quot-Length_p_74527.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $5.87 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-4T-Plain-Eye-Bolt-716quot-Thread-OD-1-16quot-Eye-ID-3-14quot-Length_p_74527.html EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $5.87 [Add to Cart]

]]> EYEBOLTS

Plain Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.
• Each lot is tested and inspected to insure conformance to specifications
• Available with UNC Class 2A thread only
• Plain pattern eyebolts must never be used to lift an angular load
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable
• Tightness and seating must be checked after initial load

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacturer.

EYEBOLTS

Plain Pattern

Product	Shank Diameter	Threads	Capacity of	Length of	Inner Diameter	Head Cross Section	Overall	Ultimate Strength
Code	(Inches)	per Inch	Vertical Load (lbs)	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(lbs)
EB-1T	1/4	20	500	1	3/4	9/32	2-1/4	2500
EB-2T	5/16	18	900	1-1/8	27/32	9/32	2-5/8	4500
EB-3T	3/8	16	1,300	1-1/4	1-1/32	5/16	2-29/32	6500
EB-4T	7/16	14	1,800	1-3/8	1-1/16	3/8	3-1/4	9000
EB-5T	1/2	13	1,400	1-1/2	1-1/8	5/32	3-5/8	12000
EB-6T	9/16	12	3,000	1-5/8	1-1/4	1/2	3-31/32	15000
EB-7T	5/8	11	4,000	1-3/4	1-5/16	9/16	4-3/8	20000
EB-8T	3/4	10	5,000	2	1-17/32	5/8	4-25/32	25000
EB-9T	7/8	9	7,000	2-1/4	1-5/8	13/16	5-9/16	35000
EB-10T	1	8	9,000	2-1/2	1-3/4	29/32	6-1/8	45000
EB-11T	1-1/8	7	12,000	2-3/4	1-15/16	1-1/16	6-7/8	60000
EB-12T	1-1/4	7	15,000	3-1/2	2-5/32	1-5/32	7-1/2	75000
EB-14T	1-1/2	6	21,000	3-3/4	2-7/16	1-13/32	8-13/16	105000
EB-15T	1-3/4	5	28,000	3-3/4	2-25/32	1-21/32	9-7/8	140000
EB-16T	2	4-1/2	38,000	4	3-5/32	1-27/32	11	190000
EB-17T	2-1/2	4	56,000	5	4	2-1/4	13-1/2	280000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-5T-Plain-Eye-Bolt-12quot-Thread-OD-1-18quot-Eye-ID-3-58quot-Length_p_74528.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $6.66 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-5T-Plain-Eye-Bolt-12quot-Thread-OD-1-18quot-Eye-ID-3-58quot-Length_p_74528.html EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $6.66 [Add to Cart]

]]> EYEBOLTS

Plain Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.
• Each lot is tested and inspected to insure conformance to specifications
• Available with UNC Class 2A thread only
• Plain pattern eyebolts must never be used to lift an angular load
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable
• Tightness and seating must be checked after initial load

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacturer.

EYEBOLTS

Plain Pattern

Product	Shank Diameter	Threads	Capacity of	Length of	Inner Diameter	Head Cross Section	Overall	Ultimate Strength
Code	(Inches)	per Inch	Vertical Load (lbs)	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(lbs)
EB-1T	1/4	20	500	1	3/4	9/32	2-1/4	2500
EB-2T	5/16	18	900	1-1/8	27/32	9/32	2-5/8	4500
EB-3T	3/8	16	1,300	1-1/4	1-1/32	5/16	2-29/32	6500
EB-4T	7/16	14	1,800	1-3/8	1-1/16	3/8	3-1/4	9000
EB-5T	1/2	13	1,400	1-1/2	1-1/8	5/32	3-5/8	12000
EB-6T	9/16	12	3,000	1-5/8	1-1/4	1/2	3-31/32	15000
EB-7T	5/8	11	4,000	1-3/4	1-5/16	9/16	4-3/8	20000
EB-8T	3/4	10	5,000	2	1-17/32	5/8	4-25/32	25000
EB-9T	7/8	9	7,000	2-1/4	1-5/8	13/16	5-9/16	35000
EB-10T	1	8	9,000	2-1/2	1-3/4	29/32	6-1/8	45000
EB-11T	1-1/8	7	12,000	2-3/4	1-15/16	1-1/16	6-7/8	60000
EB-12T	1-1/4	7	15,000	3-1/2	2-5/32	1-5/32	7-1/2	75000
EB-14T	1-1/2	6	21,000	3-3/4	2-7/16	1-13/32	8-13/16	105000
EB-15T	1-3/4	5	28,000	3-3/4	2-25/32	1-21/32	9-7/8	140000
EB-16T	2	4-1/2	38,000	4	3-5/32	1-27/32	11	190000
EB-17T	2-1/2	4	56,000	5	4	2-1/4	13-1/2	280000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-6T-Plain-Eye-Bolt-916quot-Thread-OD-1-14quot-Eye-ID-3-3132quot-Length_p_74529.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $9.45 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-6T-Plain-Eye-Bolt-916quot-Thread-OD-1-14quot-Eye-ID-3-3132quot-Length_p_74529.html EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $9.45 [Add to Cart]

]]> EYEBOLTS

Plain Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.
• Each lot is tested and inspected to insure conformance to specifications
• Available with UNC Class 2A thread only
• Plain pattern eyebolts must never be used to lift an angular load
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable
• Tightness and seating must be checked after initial load

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacturer.

EYEBOLTS

Plain Pattern

Product	Shank Diameter	Threads	Capacity of	Length of	Inner Diameter	Head Cross Section	Overall	Ultimate Strength
Code	(Inches)	per Inch	Vertical Load (lbs)	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(lbs)
EB-1T	1/4	20	500	1	3/4	9/32	2-1/4	2500
EB-2T	5/16	18	900	1-1/8	27/32	9/32	2-5/8	4500
EB-3T	3/8	16	1,300	1-1/4	1-1/32	5/16	2-29/32	6500
EB-4T	7/16	14	1,800	1-3/8	1-1/16	3/8	3-1/4	9000
EB-5T	1/2	13	1,400	1-1/2	1-1/8	5/32	3-5/8	12000
EB-6T	9/16	12	3,000	1-5/8	1-1/4	1/2	3-31/32	15000
EB-7T	5/8	11	4,000	1-3/4	1-5/16	9/16	4-3/8	20000
EB-8T	3/4	10	5,000	2	1-17/32	5/8	4-25/32	25000
EB-9T	7/8	9	7,000	2-1/4	1-5/8	13/16	5-9/16	35000
EB-10T	1	8	9,000	2-1/2	1-3/4	29/32	6-1/8	45000
EB-11T	1-1/8	7	12,000	2-3/4	1-15/16	1-1/16	6-7/8	60000
EB-12T	1-1/4	7	15,000	3-1/2	2-5/32	1-5/32	7-1/2	75000
EB-14T	1-1/2	6	21,000	3-3/4	2-7/16	1-13/32	8-13/16	105000
EB-15T	1-3/4	5	28,000	3-3/4	2-25/32	1-21/32	9-7/8	140000
EB-16T	2	4-1/2	38,000	4	3-5/32	1-27/32	11	190000
EB-17T	2-1/2	4	56,000	5	4	2-1/4	13-1/2	280000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-9T-Plain-Eye-Bolt-78quot-Thread-OD-1-58quot-Eye-ID-5-916quot-Length_p_119204.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $17.76 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-9T-Plain-Eye-Bolt-78quot-Thread-OD-1-58quot-Eye-ID-5-916quot-Length_p_119204.html EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $17.76 [Add to Cart]

]]> EYEBOLTS

Plain Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.
• Each lot is tested and inspected to insure conformance to specifications
• Available with UNC Class 2A thread only
• Plain pattern eyebolts must never be used to lift an angular load
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable
• Tightness and seating must be checked after initial load

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacturer.

EYEBOLTS

Plain Pattern

Product	Shank Diameter	Threads	Capacity of	Length of	Inner Diameter	Head Cross Section	Overall	Ultimate Strength
Code	(Inches)	per Inch	Vertical Load (lbs)	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(lbs)
EB-1T	1/4	20	500	1	3/4	9/32	2-1/4	2500
EB-2T	5/16	18	900	1-1/8	27/32	9/32	2-5/8	4500
EB-3T	3/8	16	1,300	1-1/4	1-1/32	5/16	2-29/32	6500
EB-4T	7/16	14	1,800	1-3/8	1-1/16	3/8	3-1/4	9000
EB-5T	1/2	13	1,400	1-1/2	1-1/8	5/32	3-5/8	12000
EB-6T	9/16	12	3,000	1-5/8	1-1/4	1/2	3-31/32	15000
EB-7T	5/8	11	4,000	1-3/4	1-5/16	9/16	4-3/8	20000
EB-8T	3/4	10	5,000	2	1-17/32	5/8	4-25/32	25000
EB-9T	7/8	9	7,000	2-1/4	1-5/8	13/16	5-9/16	35000
EB-10T	1	8	9,000	2-1/2	1-3/4	29/32	6-1/8	45000
EB-11T	1-1/8	7	12,000	2-3/4	1-15/16	1-1/16	6-7/8	60000
EB-12T	1-1/4	7	15,000	3-1/2	2-5/32	1-5/32	7-1/2	75000
EB-14T	1-1/2	6	21,000	3-3/4	2-7/16	1-13/32	8-13/16	105000
EB-15T	1-3/4	5	28,000	3-3/4	2-25/32	1-21/32	9-7/8	140000
EB-16T	2	4-1/2	38,000	4	3-5/32	1-27/32	11	190000
EB-17T	2-1/2	4	56,000	5	4	2-1/4	13-1/2	280000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-17T-Plain-Eye-Bolt-2-12quot-Thread-OD-4quot-Eye-ID-13-12quot-Length_p_249455.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $689.21 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-17T-Plain-Eye-Bolt-2-12quot-Thread-OD-4quot-Eye-ID-13-12quot-Length_p_249455.html EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $689.21 [Add to Cart]

]]> EYEBOLTS

Plain Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.
• Each lot is tested and inspected to insure conformance to specifications
• Available with UNC Class 2A thread only
• Plain pattern eyebolts must never be used to lift an angular load
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable
• Tightness and seating must be checked after initial load

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacturer.

EYEBOLTS

Plain Pattern

Product	Shank Diameter	Threads	Capacity of	Length of	Inner Diameter	Head Cross Section	Overall	Ultimate Strength
Code	(Inches)	per Inch	Vertical Load (lbs)	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(lbs)
EB-1T	1/4	20	500	1	3/4	9/32	2-1/4	2500
EB-2T	5/16	18	900	1-1/8	27/32	9/32	2-5/8	4500
EB-3T	3/8	16	1,300	1-1/4	1-1/32	5/16	2-29/32	6500
EB-4T	7/16	14	1,800	1-3/8	1-1/16	3/8	3-1/4	9000
EB-5T	1/2	13	1,400	1-1/2	1-1/8	5/32	3-5/8	12000
EB-6T	9/16	12	3,000	1-5/8	1-1/4	1/2	3-31/32	15000
EB-7T	5/8	11	4,000	1-3/4	1-5/16	9/16	4-3/8	20000
EB-8T	3/4	10	5,000	2	1-17/32	5/8	4-25/32	25000
EB-9T	7/8	9	7,000	2-1/4	1-5/8	13/16	5-9/16	35000
EB-10T	1	8	9,000	2-1/2	1-3/4	29/32	6-1/8	45000
EB-11T	1-1/8	7	12,000	2-3/4	1-15/16	1-1/16	6-7/8	60000
EB-12T	1-1/4	7	15,000	3-1/2	2-5/32	1-5/32	7-1/2	75000
EB-14T	1-1/2	6	21,000	3-3/4	2-7/16	1-13/32	8-13/16	105000
EB-15T	1-3/4	5	28,000	3-3/4	2-25/32	1-21/32	9-7/8	140000
EB-16T	2	4-1/2	38,000	4	3-5/32	1-27/32	11	190000
EB-17T	2-1/2	4	56,000	5	4	2-1/4	13-1/2	280000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-8T-Plain-Eye-Bolt-34quot-Thread-OD-1-1732quot-Eye-ID-4-2532quot-Length_p_249457.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $13.50 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-8T-Plain-Eye-Bolt-34quot-Thread-OD-1-1732quot-Eye-ID-4-2532quot-Length_p_249457.html EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $13.50 [Add to Cart]

]]> EYEBOLTS

Plain Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.
• Each lot is tested and inspected to insure conformance to specifications
• Available with UNC Class 2A thread only
• Plain pattern eyebolts must never be used to lift an angular load
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable
• Tightness and seating must be checked after initial load

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacturer.

EYEBOLTS

Plain Pattern

Product	Shank Diameter	Threads	Capacity of	Length of	Inner Diameter	Head Cross Section	Overall	Ultimate Strength
Code	(Inches)	per Inch	Vertical Load (lbs)	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(lbs)
EB-1T	1/4	20	500	1	3/4	9/32	2-1/4	2500
EB-2T	5/16	18	900	1-1/8	27/32	9/32	2-5/8	4500
EB-3T	3/8	16	1,300	1-1/4	1-1/32	5/16	2-29/32	6500
EB-4T	7/16	14	1,800	1-3/8	1-1/16	3/8	3-1/4	9000
EB-5T	1/2	13	1,400	1-1/2	1-1/8	5/32	3-5/8	12000
EB-6T	9/16	12	3,000	1-5/8	1-1/4	1/2	3-31/32	15000
EB-7T	5/8	11	4,000	1-3/4	1-5/16	9/16	4-3/8	20000
EB-8T	3/4	10	5,000	2	1-17/32	5/8	4-25/32	25000
EB-9T	7/8	9	7,000	2-1/4	1-5/8	13/16	5-9/16	35000
EB-10T	1	8	9,000	2-1/2	1-3/4	29/32	6-1/8	45000
EB-11T	1-1/8	7	12,000	2-3/4	1-15/16	1-1/16	6-7/8	60000
EB-12T	1-1/4	7	15,000	3-1/2	2-5/32	1-5/32	7-1/2	75000
EB-14T	1-1/2	6	21,000	3-3/4	2-7/16	1-13/32	8-13/16	105000
EB-15T	1-3/4	5	28,000	3-3/4	2-25/32	1-21/32	9-7/8	140000
EB-16T	2	4-1/2	38,000	4	3-5/32	1-27/32	11	190000
EB-17T	2-1/2	4	56,000	5	4	2-1/4	13-1/2	280000

ANSI Spec: B18.15 1985

]]> https://www.abolox.com/Williams-EB-7T-Plain-Eye-Bolt-58quot-Thread-OD-1-516quot-Eye-ID-4-38quot-Length_p_251966.html Wed, 7 Oct 2026 00:00:00 EST EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $10.45 [Add to Cart]

]]> https://www.abolox.com/Williams-EB-7T-Plain-Eye-Bolt-58quot-Thread-OD-1-516quot-Eye-ID-4-38quot-Length_p_251966.html EYEBOLTSPlain PatternFeatures:Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.Each lot is tested and inspected to insure conformance to specificationsAvailab...[Read More]
Our Price: $10.45 [Add to Cart]

]]> EYEBOLTS

Plain Pattern

Features:

• Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage.
• Each lot is tested and inspected to insure conformance to specifications
• Available with UNC Class 2A thread only
• Plain pattern eyebolts must never be used to lift an angular load
• Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
• To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable
• Tightness and seating must be checked after initial load

Country of Origin: US

Manufacturer Lifetime Warranty - subject to terms and conditions of manufacturer.

EYEBOLTS

Plain Pattern

Product	Shank Diameter	Threads	Capacity of	Length of	Inner Diameter	Head Cross Section	Overall	Ultimate Strength
Code	(Inches)	per Inch	Vertical Load (lbs)	Shank (Inches)	(Inches)	Thickness (Inches)	Length (Inches)	(lbs)
EB-1T	1/4	20	500	1	3/4	9/32	2-1/4	2500
EB-2T	5/16	18	900	1-1/8	27/32	9/32	2-5/8	4500
EB-3T	3/8	16	1,300	1-1/4	1-1/32	5/16	2-29/32	6500
EB-4T	7/16	14	1,800	1-3/8	1-1/16	3/8	3-1/4	9000
EB-5T	1/2	13	1,400	1-1/2	1-1/8	5/32	3-5/8	12000
EB-6T	9/16	12	3,000	1-5/8	1-1/4	1/2	3-31/32	15000
EB-7T	5/8	11	4,000	1-3/4	1-5/16	9/16	4-3/8	20000
EB-8T	3/4	10	5,000	2	1-17/32	5/8	4-25/32	25000
EB-9T	7/8	9	7,000	2-1/4	1-5/8	13/16	5-9/16	35000
EB-10T	1	8	9,000	2-1/2	1-3/4	29/32	6-1/8	45000
EB-11T	1-1/8	7	12,000	2-3/4	1-15/16	1-1/16	6-7/8	60000
EB-12T	1-1/4	7	15,000	3-1/2	2-5/32	1-5/32	7-1/2	75000
EB-14T	1-1/2	6	21,000	3-3/4	2-7/16	1-13/32	8-13/16	105000
EB-15T	1-3/4	5	28,000	3-3/4	2-25/32	1-21/32	9-7/8	140000
EB-16T	2	4-1/2	38,000	4	3-5/32	1-27/32	11	190000
EB-17T	2-1/2	4	56,000	5	4	2-1/4	13-1/2	280000

ANSI Spec: B18.15 1985

]]>